6 replies to this topic

[Brad168321]

Running Origin version of Zero Hour

 

Have downloaded patchs not that i think they are required and also Gentool

 

Game launch is set as Admin in Windows XP service pack 3 compatibility.

 

I am running Windows 10

 

I launch game fine and can join a room but cannot "ready" icon for game to launch.

 

My router settings are all default.

 

I get no errors just the inability to physically be allowed to launch the game.

 

Using server nntest.cnc-online.net:30000
Bound to local port 60930
Bound to local alternate port 60931
Resolving hostname 'nntest.cnc-online.net'...
Resolved server host to be '37.247.49.213'
Sending client INIT from port 60930 to nntest.cnc-online.net:30000
Received server INIT [628869]
Our public address is 121.220.36.104:60930
Sending client INIT2 [628869] from port 60931 to nntest.cnc-online.net:30000
Received server INIT2 [628869]
Our alternate public address is 121.220.36.104:60931
Sending cient START [628869] from port 60931 to nntest.cnc-online.net:30000
Received server START [628869]
Server extra port is 40000
Sending client PING [628869] from port 60930 to nntest.cnc-online.net:40000
Received server PING(1) [628869]
Received server PING(2) [628869]
Received server PING(3) [628869]

===========
  SUCCESS
===========
Received 3 pings from nntest.cnc-online.net:40000.
NAT negotiation works with your router and connection.
==> You do not have to use port forwarding.
Press any key to continue . . .

 

Thanks

 

[Brad168321]

I should also note my firewall settings allow for both private and public access for Zero Hour.

[ToxicShock]

I have some bad news for you (it's not that bad ).     If you tried to patch the Origin version of the game, the chances are that you have corrupted the game code.     You should probably uninstall the game and reinstall it.   

[Brad168321]

Hi Toxic,

 

I have deleted, redownloaded the game and installed,

 

-gentool

-cnc launchers patch

-allowed all firewall settings both public and private

-have set windows compatibility and admin

 

But continue to have the exact same issue with no errors, just an inability to select "ready" In room before game launch.

 

Any ideas would be appreciated, thanks.

[ToxicShock]

I'm still with you but just a little out of ideas.    I think I need to see that in the server log.    Could you try to join a game and then post in here immediately afterwards so I can find that in the server log and see if that throws any light on it.

[Brad168321]

Hi Toxic,

 

Thank you so much for the assistance, it is appreciated.

 

As per your instructions, not more then 5 mis before posting this i had attampted to join a game but again to no success.

 

Feel free to let me know if i can do anything else.

[ToxicShock]

Sorry, I couldn't see any errors in the log that might shine some light on the problem.     I am not even sure that this is a problem with C&C:Online at the moment.     Do you think you could do me a favour and ask about it in the technical support forum on gamereplays?      If you do that, please could you link back in here?  
 
Zero Hour Tech Support