Jump to content


Photo

Zero Hour Online problem connecting.

unable connect connection disconnection disconnect

Best Answer mijk, 28 November 2018 - 07:26 AM

I fixed this by forcing Wifi on 2,4GHZ instead of dynamic 5GHZ.

 

For googlepeople who are in search about this. Quite strange tho, but if it works, it works.

Go to the full post


  • Please log in to reply
1 reply to this topic

#1 mijk

mijk
  • New Members
  • 2 posts

Posted 27 November 2018 - 03:00 PM

Hi.

 

So i am having connection problems Zero Hour online. I myself, am network engineer, so i know quite good what i'm doing. I hope someone encountered the same problem and solved it, else i'm lost.

 

My just changed from modem with my ISP, so i'm quite sure thats the problem, but which settings i use, doesnt matter, nothing works. DMZ, UPNP, Portforwarding. Even the diagnostic tool says i pass the tests.

 

 

 

What happens; 

I connect to everyone, but no one connects to me. Even the "loading bars" fully fill, as shown on the screen below;

 

 hw2yItg.jpg

 

I also tried this with 6 players, everyone loads good (for me) and i'm immediately ingame. They are all stuck (all 5 people) in the loading screen and they dont see me load, so all people count down in the disconnection menu to around 6 seconds (for me), then the disconnection screen disappears, and reappears again, forever.

 

At this point im using UPNP as setting, without portforwarding or DMZ, but neither of those options work, and all options give the same output in the DIAG tool.

 

Aanyone who has an idea what i can try next?

 

My old modem worked well. 

 

Thanks in advance.

 

PS; Are the same ports being used as original CNC ZH ONLINE?


Edited by mijk, 27 November 2018 - 07:41 PM.


#2 mijk

mijk
  • New Members
  • 2 posts

Posted 28 November 2018 - 07:26 AM   Best Answer

I fixed this by forcing Wifi on 2,4GHZ instead of dynamic 5GHZ.

 

For googlepeople who are in search about this. Quite strange tho, but if it works, it works.


Edited by mijk, 28 November 2018 - 07:26 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users