i cant play the mod since the first decade says it is below minimum standards how.
do i play it?
prob
Started by
Guest_Guest_*
, Jul 27 2006 05:46 PM
11 replies to this topic
#2
Bob
-
- Project Team
-
- 1,252 posts
Marine Corps Expeditionary Fighting Vehicle (EFV)
- Location:The country music capital - Nashville TN, U.S.A.
- Projects:Project Raptor, ZH Maps
- "If everyone is thinking alike, someone isn't thinking."
Posted 27 July 2006 - 11:08 PM
If your computer 'is below minimum standards' and wont run C&C 'The First Decade', then it won't run Project Raptor either. If you are below minimum standards then you need to upgrade your computer.
If your having other problems with C&C The First Decade, then I suggest posting to a site that deals with that package specifically. Not many of us here run that package at this point. We run Generals and the Zero hour expansion pack that is sold separately. Therefore, have little knowledge of 'C&C The First Decade' specific bugs.
So get your TFD running first, and then comeback and try running PR. Just keep in mind we are getting a couple of reports now of PR not running with TFD. The mods creator has been notified of this potential issue.
If your having other problems with C&C The First Decade, then I suggest posting to a site that deals with that package specifically. Not many of us here run that package at this point. We run Generals and the Zero hour expansion pack that is sold separately. Therefore, have little knowledge of 'C&C The First Decade' specific bugs.
So get your TFD running first, and then comeback and try running PR. Just keep in mind we are getting a couple of reports now of PR not running with TFD. The mods creator has been notified of this potential issue.
- Bob
#3
Guest_Guest_*
Guest_Guest_*
-
- Guests
Posted 04 August 2006 - 04:58 PM
TFD runs fine but when i start ZH after installing PR i get an error about overheated hardware even if its the first thing i do .
do you know anything i can do????
do you know anything i can do????
#4
00 Nobody
-
- Members
-
- 1,586 posts
Founder of 00 Nobody Maps
- Location:Oklahoma
- Projects:00 Nobody Maps
- Mapper and Founder of 00 Nobody Maps
Posted 04 August 2006 - 11:03 PM
First, get a new fan and make sure it's below 90 degrees in the room your computer is in. Second, make sure it isn't running ALL the time. And third, try reinstalling TFD (uninstall then install). If that doesn't clarify your problem, then don't play PR on it (or upgrade, if you have the $$$)
00 Nobody Maps and Missions
Desert Legends RPG C&C's ONLY
Desert Doorway Defenders
Desert Corps.
BattleTanx
Operation: The Dragon's Den
Construct additional pylons. No, seriously. The power's out. Those power lines are overloaded. WE NEED MOAR PYLONS!
Desert Legends RPG C&C's ONLY
Desert Doorway Defenders
Desert Corps.
BattleTanx
Operation: The Dragon's Den
Construct additional pylons. No, seriously. The power's out. Those power lines are overloaded. WE NEED MOAR PYLONS!
#5
Bob
-
- Project Team
-
- 1,252 posts
Marine Corps Expeditionary Fighting Vehicle (EFV)
- Location:The country music capital - Nashville TN, U.S.A.
- Projects:Project Raptor, ZH Maps
- "If everyone is thinking alike, someone isn't thinking."
Posted 05 August 2006 - 02:46 AM
I seriously doubt that's the problem. He's getting a standard 'serious error' message, and that could mean just about anything, not just overheated hardware.
This is not the first report of a TFD problem while using PR. It's being looked into. For now though, if you have TFD you may not be able to play PR. Please be patient while the problem is being investigated.
Thank you.
This is not the first report of a TFD problem while using PR. It's being looked into. For now though, if you have TFD you may not be able to play PR. Please be patient while the problem is being investigated.
Thank you.
- Bob
#6
Guest_Guest_*
Guest_Guest_*
-
- Guests
Posted 06 August 2006 - 02:56 PM
i will try to install TFD again if it doesnt work ill wait till u find anything
#7
Karlos Vandango
-
- Project Team
-
- 2,139 posts
I Post Every Second Of My Life
- Location:Cheltenham , England , Europe , The Earth
- Projects:Beta Tester Project Raptor
- The Posting Maniac
Posted 21 August 2006 - 05:25 PM
ive had alot of proplems with TFD even without pr
basicly i think OP (opertaing system ) is a factor
basicly i think OP (opertaing system ) is a factor
#8
Vanguard
-
- Hosted
-
- 2,139 posts
Modding Guru
- Location:Texas
- Projects:Project Raptor
- Stand Down Sir!
Posted 21 August 2006 - 10:01 PM
No it's the way they assembled TFD, that's what causes the problems.
- Vanguard
#9
xjjohnno
-
- Members
-
- 89 posts
Posted 22 August 2006 - 09:54 PM
Of course you could use Modtoaster to manage the mod,the latest version was built to deal with issues related to TFD.
#10
Guest_jasper_*
Guest_jasper_*
-
- Guests
Posted 14 June 2007 - 07:42 PM
yes its me again
i got question
does any of you make maps with worldbuilder???
if so can i send you a map via email or something cuz i dont know what im doing wrong???
i got all the Centers,Backdoors and Flanks, i got the CombatZone. and the Inner and Outerparimeters.
if i start my map in the game the shirmish player builds his base and units but it doesnt attack me.
if i make the scripts for it to build teams(and i selected teams to be build) it builds no base
if someone can please help me since i can find no usefull forum that handels this problem.
thnx anyway
i got question
does any of you make maps with worldbuilder???
if so can i send you a map via email or something cuz i dont know what im doing wrong???
i got all the Centers,Backdoors and Flanks, i got the CombatZone. and the Inner and Outerparimeters.
if i start my map in the game the shirmish player builds his base and units but it doesnt attack me.
if i make the scripts for it to build teams(and i selected teams to be build) it builds no base
if someone can please help me since i can find no usefull forum that handels this problem.
thnx anyway
#11
Guest_jasper_*
Guest_jasper_*
-
- Guests
Posted 14 June 2007 - 08:27 PM
i think i know how to play project paptor with TDF
it might be old news but i copyd the PR script files into
C:\program files\EA games\command & conquer The First Decade\command &conquer Generals Zero Hour\Data\scripts.
then i tried zero hour again ang it works completely!!!
this might be helpfull if you didnt find nothing yet
it might be old news but i copyd the PR script files into
C:\program files\EA games\command & conquer The First Decade\command &conquer Generals Zero Hour\Data\scripts.
then i tried zero hour again ang it works completely!!!
this might be helpfull if you didnt find nothing yet
#12
Bob
-
- Project Team
-
- 1,252 posts
Marine Corps Expeditionary Fighting Vehicle (EFV)
- Location:The country music capital - Nashville TN, U.S.A.
- Projects:Project Raptor, ZH Maps
- "If everyone is thinking alike, someone isn't thinking."
Posted 21 June 2007 - 02:37 AM
There is a forum that deals with these problems and more. They also have an excellent set of video tutorials for the beginner. Try the forum at CnCmaps at:yes its me again
i got question
does any of you make maps with worldbuilder???
...
if someone can please help me since i can find no useful forum that handles this problem.
thnx anyway
http://cncmaps.net/index.php?act=idx
- Bob
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
