125 replies to this topic

[Gimli1401]

ok well this is what i want to do i want the men and other faction well for instance i know lil ini coding use final big but i want to change the amount of units in Each Horde

[Kyross]

When it talks about formation width and depth just change the number. It'll usually be something like 3 and 5, so three ranks with 5 men across = 15 men in the squad.

[Smartdude1301]

When it talks about formation width and depth just change the number. It'll usually be something like 3 and 5, so three ranks with 5 men across = 15 men in the squad.

Yes i know They come in groups of 15 But i want to Add 15 More to the battalion so i could have total Of 30

And also i was Wondering If i could edit code to where they come Pre equiped With Heavy Armor


Thnx In Advance


This is what i want to change in just the men i already know how to change prices and all that and command points but like i said i want 30 Then Heres List of what i want to do with them If Possible


Gondor Soildiers

Change From Group Of 15=30
Command Points From 60=30
Build Time 20= 20 seconds
Comes Equiped With Heavy Armor
Cost 250 For Without Heavy Armor
Then Once Upgraded To Lev 3 Barracks
Get With Heavy Armor For 400

Edited by Smartdude1301, 09 May 2008 - 07:22 PM.

[Smartdude1301]

ok i figured out how to add more units but heres what happend i did this for 30 and it worked but there attached to each other heres the code

[codebox]RankInfo = RankNumber:1 UnitType:GondorFighter Position:X:50 Y:0 Position:X:50 Y:20 Position:X:50 Y:-20 Position:X:50 Y:40 Position:X:50 Y:-40
RankInfo = RankNumber:2 UnitType:GondorFighter Position:X:30 Y:0 Leader 1 0 Position:X:30 Y:20 Leader 1 1 Position:X:30 Y:-20 Leader 1 2 Position:X:30 Y:40 Leader 1 3 Position:X:30 Y:-40 Leader 1 4
RankInfo = RankNumber:3 UnitType:GondorFighter Position:X:10 Y:0 Leader 2 0 Position:X:10 Y:20 Leader 2 1 Position:X:10 Y:-20 Leader 2 2 Position:X:10 Y:40 Leader 2 3 Position:X:10 Y:-40 Leader 2 4
RankInfo = RankNumber:1 UnitType:GondorFighter Position:X:50 Y:0 Position:X:50 Y:20 Position:X:50 Y:-20 Position:X:50 Y:40 Position:X:50 Y:-40
RankInfo = RankNumber:2 UnitType:GondorFighter Position:X:30 Y:0 Leader 1 0 Position:X:30 Y:20 Leader 1 1 Position:X:30 Y:-20 Leader 1 2 Position:X:30 Y:40 Leader 1 3 Position:X:30 Y:-40 Leader 1 4
RankInfo = RankNumber:3 UnitType:GondorFighter Position:X:10 Y:0 Leader 2 0 Position:X:10 Y:20 Leader 2 1 Position:X:10 Y:-20 Leader 2 2 Position:X:10 Y:40 Leader 2 3 Position:X:10 Y:-40 Leader 2 4
[/codebox]





And heres a screen

Attached Thumbnails

• 

Edited by Smartdude1301, 09 May 2008 - 07:47 PM.

[Smartdude1301]

ok i figured out how to add more units but heres what happend i did this for 30 and it worked but there attached to each other heres the code

RankInfo = RankNumber:1 UnitType:GondorFighter Position:X:50 Y:0			Position:X:50 Y:20				Position:X:50 Y:-20				Position:X:50 Y:40				Position:X:50 Y:-40 		RankInfo = RankNumber:2 UnitType:GondorFighter Position:X:30 Y:0 Leader 1 0	Position:X:30 Y:20 Leader 1 1	Position:X:30 Y:-20 Leader 1 2	Position:X:30 Y:40 Leader 1 3	Position:X:30 Y:-40 Leader 1 4		RankInfo = RankNumber:3 UnitType:GondorFighter Position:X:10 Y:0 Leader 2 0	Position:X:10 Y:20 Leader 2 1	Position:X:10 Y:-20 Leader 2 2	Position:X:10 Y:40 Leader 2 3	Position:X:10 Y:-40 Leader 2 4            RankInfo = RankNumber:1 UnitType:GondorFighter Position:X:50 Y:0 Position:X:50 Y:20 Position:X:50 Y:-20 Position:X:50 Y:40 Position:X:50 Y:-40            RankInfo = RankNumber:2 UnitType:GondorFighter Position:X:30 Y:0 Leader 1 0 Position:X:30 Y:20 Leader 1 1 Position:X:30 Y:-20 Leader 1 2    Position:X:30 Y:40 Leader 1 3 Position:X:30 Y:-40 Leader 1 4            RankInfo = RankNumber:3 UnitType:GondorFighter Position:X:10 Y:0 Leader 2 0 Position:X:10 Y:20 Leader 2 1 Position:X:10 Y:-20 Leader 2 2 Position:X:10 Y:40 Leader 2 3 Position:X:10 Y:-40 Leader 2 4

And heres a screen

Bump

[Lurtzy]

The x and y positins have to be different.

[Smartdude1301]

The x and y positins have to be different.

Like so How if you dont mind would you Kindly share the code cause i cant figure it Out

[Lurtzy]

For the thing where they start out with heavy armor, read my tutorial. Position:X:30 Y:0, This is what you need to edit for the positions of each unit in the horde. There is a position for each unit.

Here is a chart. (units face to the right)

Attached Thumbnails

• 

Edited by Lurtz101, 10 May 2008 - 03:40 PM.

[Smartdude1301]

For the thing where they start out with heavy armor, read my tutorial. Position:X:30 Y:0, This is what you need to edit for the positions of each unit in the horde. There is a position for each unit.

Here is a chart. (units face to the right)

Thnx illl try that out

[Smartdude1301]

Hey lurtz one More question do i add this [codebox]Behavior = GrantUpgradeCreate ModuleTag_GrantForgedBlades
UpgradeToGrant = Upgrade_IsengardForgedBlades
End[/codebox]


Into The menhordes.ini and Where

[Smartdude1301]

ok i got the heavy armor and forged blades to work i had to remove old code First Works like a charm Thnx So Much )

[Lurtzy]

Glad I could be of service.

[Smartdude1301]

Glad I could be of service.

Thnx will Be sure to mention you in my Mod for helping Me Thnx a Whole Lot

Also could i add a Balrog Playable anytime cause i cant find its ini

Edited by Smartdude1301, 11 May 2008 - 12:50 AM.

[Lurtzy]

Balrog is in data/ini/neutral/neutralunits.ini. When I first started out, it took me FOREVER to find his ini!

As for his life time, just remove this

Behavior = LifetimeUpdate ModuleTag_LifetimeUpdate
		MinLifetime		= BALROG_LIFETIME
		MaxLifetime		= BALROG_LIFETIME
		DeathType		= FADED
	End

Glad I could help!

[Smartdude1301]

Balrog is in data/ini/neutral/neutralunits.ini. When I first started out, it took me FOREVER to find his ini!

As for his life time, just remove this

Behavior = LifetimeUpdate ModuleTag_LifetimeUpdate
		MinLifetime		= BALROG_LIFETIME
		MaxLifetime		= BALROG_LIFETIME
		DeathType		= FADED
	End

Glad I could help!

Tnx Your the best Any ideo on the horde size yet cause i still cant figure out code but once i do ill remember

[Smartdude1301]

i Couldnt fine The ini file for the balrog im in Bfme 2 not rotwk

[Lurtzy]

I have BFME2 also. He doesn't have his own file, he is the 1st unit in neutralunits.ini.

[Smartdude1301]

I have BFME2 also. He doesn't have his own file, he is the 1st unit in neutralunits.ini.

So its in the ini File Right Ok ill Look again but i didnt see it

[Lurtzy]

Open up neutralunits.ini and search for MordorBalrog (Should be at the very top).

[Smartdude1301]

Open up neutralunits.ini and search for MordorBalrog (Should be at the very top).

Found it Thnx if you dont mind could you share the horde code with me please