Im getting a new graphic card
#41
Posted 24 September 2009 - 01:18 AM
#42
Posted 24 September 2009 - 08:50 PM
Thought I'd have that here to save time.
#43
Posted 24 September 2009 - 11:32 PM
Edited by Spartan184, 24 September 2009 - 11:33 PM.
#44
Posted 25 September 2009 - 04:22 AM
Keep in mind that you can't use DDR3 is your motherboard doesn't support it.
That's not true. He can use it but it won't be at its full potential and perform much worse than it would if he used the correct specification.Hope you enjoy wasting money if you get DDR3 memory then. Your mobo isn't compatible.
Not quite yet. Upgrade the current system and wait about six months for Intel's 1156 boards to drop in price and build one of those instead.Lol ok then i wont buy DDR3 ram. But should i upgrade motherboard?
However, for your current system a 512MB 9600GT, or a 9800GTX+ if you get more cash, and 4GB of GSKILL, or OCZ, RAM would beef things up considerably. A dual core processor is nothing to snub just yet so that's fine.
NZ.org | BBPCG
Discord: The Astronomer#1314
Steam
#45
Posted 25 September 2009 - 06:40 AM
nVidia and ATI is about to pick up again? Don't rush into a purchase. Not even based on our advice. Sit back, bide your time
a little and do your own research on the components you have and want. You might come to the same conclusion as Fen.
You might go for something different. But you will feel a lot happier and confident about your purchase.
EDIT: For RAM, my recommendation is either OCZ or Corsair. No experience with GSkill, so no opinion on them. With GPUs
I'd put my full support behind Asus and BFG and warn you to give XFX a very wide birth. Nothing but problems there.
Edited by Caspa, 25 September 2009 - 06:42 AM.
Thought I'd have that here to save time.
#46
Posted 25 September 2009 - 05:13 PM
Either way, I recommend the 9600GT. I can't make someone buy it but from my experience, it's awesome.
However... since he has an AMD board, he might be better off with an HD4850/4870.
NZ.org | BBPCG
Discord: The Astronomer#1314
Steam
#47
Posted 26 September 2009 - 12:55 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users