Jump to content


cirra18

Member Since 14 May 2016
Offline Last Active Mar 19 2017 11:05 PM

Posts I've Made

In Topic: MO3.3 SUPPORT // Game or Client Crashes & Launch Issues Megathread

19 March 2017 - 01:40 PM

Well, referring a bit to Speeder's first page post here, you need to set up every .exe files to run with Windows XP Service Pack 3 compatibility settings. It can be done by right click the file, open up the properties, then go to Compatibility, then set up which compatibility it should be running. You will want to do this on all three .exe files (syringe.exe, gamemd.exe and MentalOmegaClient.exe). You also need to run as Administrator


Ah, ok. I actually do recall doing this for yet another computer a long while back for vanilla YR, and that thought did come up... Though I dismissed it as the vanilla YR worked fine for this recent computer, and it was just the mod that didn't. One last question though: will changing the compatibility affect any other games or anything else? Thanks again.

In Topic: MO3.3 SUPPORT // Game or Client Crashes & Launch Issues Megathread

19 March 2017 - 04:03 AM

sounds like compatibility problems


Alright, perhaps you could elaborate a bit? The only difference between this computer and the one that runs MO3.3 is that the former's graphics card and processor is amd instead of intel, and is newer than the latter. Also, the amd computer that isn't running MO3.3 runs vanilla YR just fine. Is there anything that can be done about this to fix it? And if so, what do I need to do to go about fixing this? My knowledge of computers, mods etc. Is somewhat limited, so if it is possible to fix then providing the steps to do so would be a huge help, thanks. Or even just letting me know nothing can be done, although disappointing, would be helpful as well. Thanks again.

In Topic: MO3.3 SUPPORT // Game or Client Crashes & Launch Issues Megathread

18 March 2017 - 05:51 PM

Oops I meant Syringe.log

And I use [spoiler] usually

Here is the syringe.log:
[spoiler][15:34:34] Syringe 0.7.1.0

[15:34:34] ===============
 
[15:34:34] WinMain: arguments = ""gamemd.exe" -SPAWN -CD -LOG -SPAWN"
[15:34:34] WinMain: Trying to load executable file "gamemd.exe"...
 
[15:34:34] SyringeDebugger::RetrieveInfo: Retrieving info from the executable file...
[15:34:34] SyringeDebugger::RetrieveInfo: Executable information successfully retrieved.
[15:34:34 exe = gamemd.exe
[15:34:34 pImLoadLibrary = 0x007E1220
[15:34:34 pImGetProcAddress = 0x007E1250
[15:34:34 pcEntryPoint = 0x007CD80F
[15:34:34 dwExeSize = 0x00497FE0
[15:34:34 dwExeCRC = 0x1B499086
[15:34:34 dwTimestamp = 0x3BDF544E
 
[15:34:34] SyringeDebugger::RetrieveInfo: Opening gamemd.exe to determine imports.
[15:34:34] WinMain: SyringeDebugger::FindDLLs();
 
[15:34:34] SyringeDebugger::FindDLLs: Recognized DLL: "Ares.dll"
[15:34:34] SyringeDebugger::Handshake: Calling "Ares.dll" ...
[15:34:34] SyringeDebugger::Handshake: Answers "Found Yuri's Revenge 1.001 (UC). Applying Ares 0.Cp1." (0)
[15:34:34] SyringeDebugger::FindDLLs: Recognized DLL: "cncnet5.dll"
[15:34:36] SyringeDebugger::FindDLLs: Done (1216 hooks added).
 
[15:34:36] WinMain: SyringeDebugger::Run("-SPAWN -CD -LOG -SPAWN");
 
[15:34:36] SyringeDebugger::Run: Running process to debug. cmd = "gamemd.exe -SPAWN -CD -LOG -SPAWN"
[15:34:36] SyringeDebugger::Run: Allocating 0x1000 bytes ...
[15:34:36] SyringeDebugger::Run: pAlloc = 0x001C0000
[15:34:36] SyringeDebugger::Run: Filling allocated space with zero...
[15:34:36] SyringeDebugger::Run: Setting addresses...
[15:34:36] SyringeDebugger::Run: Writing DLL loader & caller code...
[15:34:36] SyringeDebugger::Run: pcLoadLibrary = 0x001C0001
[15:34:36] SyringeDebugger::Run: Entering debug loop...
[15:34:37] SyringeDebugger::HandleException: Could not retrieve ProcAddress for: cncnet5.dll - MZ
[15:34:37] SyringeDebugger::HandleException: Finished retrieving proc addresses.
[15:34:37] SyringeDebugger::HandleException: Creating code hooks.
[15:34:54] SyringeDebugger::Run: Done with exit code 1.
 
[15:34:54] WinMain: SyringeDebugger::Run finished.
[15:34:54] WinMain: Exiting on success.[spoiler]

In Topic: MO3.3 SUPPORT // Game or Client Crashes & Launch Issues Megathread

15 March 2017 - 04:33 PM

Also hope that is the correct log, if not then I am unsure as to where to find it.

In Topic: MO3.3 SUPPORT // Game or Client Crashes & Launch Issues Megathread

15 March 2017 - 04:31 PM

Post your client log (not the dump file). And by the way, is your YR installation legit? You kind of need that to get MO 3.3 working

The YR version that I have is from Command and Conquer: the Ultimate Collection on Origin. Although I know Origin occasionally has problems with mods, I do know that the game is most definitely from a legitimate source. Also I have the same thing (game from Origin/mod) on another computer with a bit worse hardware (both run windows 10), and it works just fine. As for the client log:
14.03. 22:18:07.968 ***Logfile for Mental Omega Client client***
14.03. 22:18:07.985 Client version: 2.0.4.5
14.03. 22:18:07.986 Loading settings.
14.03. 22:18:08.016 Initializing updater.
14.03. 22:18:08.022 Update mirror count: 1
14.03. 22:18:08.023 Running from: clientdx.exe
14.03. 22:18:08.024 Operating system: Microsoft Windows NT 6.2.9200.0
14.03. 22:18:08.025 Selected OS profile: WIN810
14.03. 22:18:08.026 Removing partial custom component downloads.
14.03. 22:18:08.028 Checking for the existence of FinalSun.ini.
14.03. 22:18:08.029 FinalSun.ini doesn't exist - writing default settings.
14.03. 22:18:08.031 An exception occured while checking the existence of FinalSun settings
14.03. 22:18:08.054 Writing installation path to the Windows registry.
14.03. 22:18:08.908 InitGraphicsMode: 1280x720
14.03. 22:18:09.150 Checking local file versions.
14.03. 22:18:09.152 Loading maps.
14.03. 22:18:09.818 Hardware info: AMD A12-9700P RADEON R7, 10 COMPUTE CORES 4C+6G (4 cores) Video controller: AMD Radeon R7 Graphics
14.03. 22:18:11.751 Attempting to parse INI\Battle.ini to populate mission list.
14.03. 22:18:11.751 File INI\Battle.ini not found. Ignoring.
14.03. 22:18:11.752 Attempting to parse INI\BattleClient.ini to populate mission list.
14.03. 22:18:11.775 Finished parsing INI\BattleClient.ini.
14.03. 22:18:11.944 Reading statistics.
14.03. 22:18:13.068 CheckForUpdates()
14.03. 22:18:13.072 Checking version on the server.
14.03. 22:18:13.073 Trying to connect to update mirror http://mentalomega.com/game/update/
14.03. 22:18:13.781 Downloaded version information, parsing.
14.03. 22:18:13.798 Server game version is 3.3.1, local version is 3.3.1
14.03. 22:18:13.801 File identifiers updated.
14.03. 22:18:13.803 Checking if custom components are outdated.
14.03. 22:18:17.052 Writing spawn.ini
14.03. 22:18:17.074 Writing map.
14.03. 22:18:17.075 Loading map INI from C:\Users\storm\Desktop\MO RA2YR\MapsMO\Standard\actionreaction.map
14.03. 22:18:17.103 Writing settings INI.
14.03. 22:18:17.193 Waiting for qres.dat or Syringe.exe to exit.
14.03. 22:18:21.631 Executing callback HandleGameProcessExited
14.03. 22:18:21.651 Executing callback HandleGameProcessExited
14.03. 22:18:21.661 Executing callback GameProcessExited
(I am unsure of how to add spoilers, on another forum I know it is something like [sp] at the beginning and end of what you want hidden, but I am not sure if it is the same here.)