4 replies to this topic

[coolfile]

As you see, I have made some "BIG" tanks which have a right OBBOX and set large number to their geometries. However, the tanks will still overlap when they get close.

Type="BOX"
				MajorRadius="90.0"
				MinorRadius="44.0"
				Height="30.0"
				ContactPointGeneration="VEHICLE"

How to fix this problem? Please help.



BTW, please comment on the tanks, thank you.

Edited by coolfile, 23 December 2007 - 06:41 AM.

[Helge129]

Tryed to invert the values of Max and Min radius? I mean, Use each ones value on the other one.

BTW: HUGE TANKS FTW!

[Golan]

Does the problem only occur in front of warfactories? It appears that SAGE lets units slip through each other if the units are too close and can´t accelerate quickly enough to make room for each other.

@Helge
Major/Minor Radius is AFAIK only X/Y-Size. Dunno why they took those names, but coolfile´s use is the correct one.

[Helge129]

I know that about minor and major radius...

BTW...golan, immer noch der selber oder auch hier durch gedreht?

[coolfile]

It appears that SAGE lets units slip through each other if the units are too close

I believe that is just the problem and could be fixed only by EALA staff. so I'm going to have my last try, ContactPoints.